FOX EPOBOND FX143 | R2 Solvent-Free Epoxy Tile Adhesive and Grout
FOX EPOBOND FX143 – Solvent-Free, Chemical-Resistant Epoxy Adhesive
Product Description
FOX EPOBOND FX143 is a two-component, epoxy resin-based, solvent-free adhesive with excellent chemical resistance.
It is suitable for both bonding and grouting ceramic tiles, marble, granite, and similar covering materials.
The product offers a hygienic surface, is easy to apply, and is ideal for demanding industrial environments.
According to TS EN 12004-1:2017, it is classified as:
R2 – Reaction Resin-Based Tile Adhesive
Its outstanding chemical resistance and hygienic properties make it particularly suitable for industrial and sanitary applications.
Application Areas
FOX EPOBOND FX143 is recommended for use in:
- Food processing facilities
- Meat and fish processing plants
- Slaughterhouses
- Pharmaceutical, paint, paper, battery, and fertilizer industries
- Printing facilities
- Industrial kitchens
- Commercial laundries
- Cafeterias and food service areas
- Hospitals and hygienic environments
- Swimming pools and thermal pools
- Wastewater treatment and purification plants
- Shopping malls, transportation terminals, and other areas exposed to heavy pedestrian traffic
Key Advantages
- Excellent resistance to chemicals and bacteria
- Resistant to mold and fungi
- Can be cleaned with water at room temperature
- Hygienic and easy to maintain
- High mechanical strength
- Resistant to freeze-thaw cycles
- Suitable for contact with drinking water
- Dirt-resistant and easy to clean
Technical Specifications
Material Composition
Component A: Epoxy resin
Component B: Epoxy hardener
Specific gravity (A+B): 1.55 ±0.05 kg/L
Mechanical Properties
Compressive Strength
- After 1 day: ≥30 N/mm²
- After 7 days: ≥45 N/mm²
Flexural Strength
- After 1 day: ≥15 N/mm²
- After 7 days: ≥30 N/mm²
Bond Strength
To concrete: ≥1.0 N/mm²
To steel: ≥1.0 N/mm²
Water Absorption (4 hours)
Very low
Application Conditions
Substrate temperature: +10°C to +30°C
Temperature resistance
- Dry conditions: -20°C to +80°C
- Wet conditions: -20°C to +50°C
Pot life: Approximately 35 minutes
Ready for foot traffic: After 7 days
Note: Values are based on +23°C and 50% relative humidity. Higher temperatures shorten working times, while lower temperatures extend them.
Application Procedure
1. Surface Preparation
- The substrate must be sound, clean, and free from dust, oil, grease, and any materials that may reduce adhesion.
- Old paint and previous coatings must be completely removed.
2. Mixing
Mix Components A and B mechanically using a drill mixer operating at 400–600 rpm for a minimum of 3 minutes.
Do not mix manually or with a trowel.
3. Mixing Ratios
5 kg Set
- Component A: 4.58 kg
- Component B: 0.42 kg
25 kg Set
- Component A: 22.88 kg
- Component B: 2.12 kg
4. Application
Apply the material using a notched trowel appropriate for the size and thickness of the covering material.
The adhesive should be used immediately after mixing.
Ceramic tiles should be installed within 30 minutes.
Any adhesive that has begun to cure on the surface should be removed before continuing.
The use of protective gloves is recommended during application.
5. Cleaning of Tools
Clean all tools and equipment immediately after application using a suitable solvent.
Once hardened, the material can only be removed mechanically.
6. Consumption
Consumption depends on the notch size of the trowel and the condition of the substrate.
Important Notes
- Mechanical mixing is mandatory. Do not mix manually with a trowel.
- Working and curing times vary depending on substrate temperature, ambient temperature, and humidity.
- Lower temperatures slow the curing process and extend working time.
- Higher temperatures accelerate curing and shorten working time.
- Do not apply when substrate or ambient temperatures are below +10°C or above +30°C.
- Avoid application during extremely hot, rainy, or windy weather.
- In cold weather, condition the unopened packages between +20°C and +25°C before use.
- Cleaning with soapy water should begin approximately 15–30 minutes after application.
- Do not add water or fresh material to the mixed product.
Packaging, Storage, and Shelf Life
Packaging
5 kg Set
- Component A: 4.58 kg
- Component B: 0.42 kg
25 kg Set
- Component A: 22.88 kg
- Component B: 2.12 kg
Shelf Life
12 months when stored between +5°C and +30°C, protected from direct sunlight.
Opened Packages
Use within 1 week after opening.
Storage Conditions
Store in the original unopened packaging in a cool, dry, frost-free environment.
For short-term storage, stack a maximum of 3 pallets.
For long-term storage, pallets should not be stacked.
Frequently Asked Questions (FAQ)
Which standard does FOX EPOBOND FX143 comply with?
It complies with TS EN 12004-1:2017 – R2.
Where can it be used?
It is suitable for food processing plants, slaughterhouses, industrial kitchens, hospitals, swimming pools, wastewater treatment facilities, and both indoor and outdoor applications requiring high chemical resistance and hygiene.
How should the product be mixed?
The two components must be mixed mechanically using a drill mixer operating at 400–600 rpm for at least 3 minutes.
What is the recommended application temperature?
The recommended substrate and ambient temperature is +10°C to +30°C.
How long do I have to install the tiles after mixing?
Tiles should be installed within 30 minutes after mixing.
When can the surface be opened to foot traffic?
The surface can be opened to foot traffic after approximately 7 days.
FOX EPOBOND FX143 is a reliable solvent-free epoxy adhesive and grout designed for demanding indoor and outdoor applications requiring exceptional chemical resistance, hygiene, and mechanical performance.