28/07/2026
A 5 cm (50 mm) XPS board with a compressive strength of 300 kPa is designed to withstand approximately 30 tons/m², making it suitable for applications where both thermal insulation and mechanical strength are required.
The 50 mm thickness helps minimize thermal bridging, improves energy efficiency, and allows for straightforward installation.
Provides excellent resistance against rainfall, moisture, and temperature fluctuations.
Suitable for medium-load facade insulation applications while improving building energy performance.
Helps reduce heat loss in residential, commercial, and industrial buildings.
Its high compressive strength makes it ideal for long-term performance under regular use.
Designed to withstand mechanical loads in areas with moderate traffic.
The 300 kPa rating allows the board to support medium to heavy structural loads.
Proper installation with sealed joints improves overall insulation efficiency.
Its low water absorption rate ensures reliable performance even in damp environments.
The lightweight structure makes handling, cutting, and installation simple.
Maintains its thermal and mechanical properties for decades when properly installed.
Ensure the substrate is clean, dry, and free from dust or loose materials.
The boards can be installed using polyurethane-based adhesives or mechanical fastening systems, depending on the application.
Seal joints appropriately to minimize thermal bridges and improve insulation performance.
When exposed outdoors, the insulation should be protected from prolonged UV exposure with a suitable finishing layer.
It is commonly used in inverted roofs, floor insulation, external wall insulation systems, balconies, terraces, and similar applications.
A 300 kPa XPS board provides approximately twice the compressive strength of a 150 kPa board, making it suitable for higher load-bearing applications.
Yes. With water absorption below 0.5%, it performs reliably in humid and moisture-prone environments.
For many moderate climate conditions, 50 mm provides effective insulation. In colder climates or projects with stricter energy requirements, additional insulation thickness may be recommended.
A 5 cm 300 kPa XPS board is a reliable and durable insulation solution for medium-load construction applications, combining excellent thermal performance, moisture resistance, and long-term structural durability.
