FİXA POLYFORM K Concentrated Formwork Release Agent | Technical Specifications, Applications, and Consumption

FİXA POLYFORM K – Concentrated Formwork Release Agent

Product Description

FİXA POLYFORM K is a concentrated formwork release agent formulated with a special emulsifier blend to ensure easy separation of formwork from concrete surfaces. It delivers professional results on wooden, plywood, plastic, and metal-accessory formwork systems. The product is diluted with water before use and helps achieve smooth, stain-free concrete surfaces.

Technical Specifications

  • Type: Concentrated chemical emulsion-based release agent
  • Color: Turns white after dilution (normal)
  • Usage: Diluted with water at a ratio of 50–80%
  • Packaging: 30 L plastic container, 210 L drum
  • Shelf Life: 12 months (+5°C to +30°C, stored in a closed and dry environment)
  • Storage: Protect from freezing

Areas of Use

  • Conventional wooden formwork systems
  • Plywood formwork
  • Plastic formwork
  • Wooden formwork with metal accessories
  • All highly absorbent formwork surfaces

Advantages

  • Economical use thanks to its concentrated formulation
  • Does not damage plywood film layers
  • Easy to apply
  • Ensures fast and trouble-free separation of concrete from formwork
  • Helps achieve smooth and stain-free concrete surfaces
  • Reduces air bubbles and improves surface quality
  • Minimizes cleaning requirements during formwork reuse, reducing labor and costs
  • Does not clog spray equipment
  • Solvent-free and environmentally friendly

Surface Preparation

  • Formwork surfaces must be completely cleaned of concrete residue, wood debris, metal particles, snow, and ice.
  • All surfaces must be clean and dry.
  • Shake the product thoroughly before use.

Application Information

  • Dilution: Mix with water at a ratio of 50–80%.
  • Application: Apply a thin, uniform coat using a spray system, roller, or brush.
  • Excessive application may cause staining and surface irregularities on concrete.
  • Do not apply at temperatures below +5°C.
  • Protect treated surfaces from rain until concrete placement.

Consumption Rates

  • Roller Application: 1 liter covers approximately 17–26 m²
  • Spray Application: 1 liter covers approximately 35–52 m²

FAQ – FİXA POLYFORM K

Can POLYFORM K be used without dilution?
No. It must be diluted with water at a ratio of 50–80%.

Is it normal for the product to turn white after dilution?
Yes, this is completely normal.

Which formwork systems can it be used on?
It can be used on wooden, plywood, plastic, metal-accessory wooden formwork, and highly absorbent formwork surfaces.

Does it damage plywood formwork?
No. It does not damage the plywood film layer.

What is the consumption rate?

  • Roller: 17–26 m² per liter
  • Spray: 35–52 m² per liter

What happens if too much product is applied?
Excess application may cause staining and surface waviness on concrete. The optimum consumption rate should be determined through site trials.

At what temperatures should it be applied?
It should be applied at temperatures of +5°C and above.

What is the shelf life?
12 months in the original unopened packaging under proper storage conditions.

Conclusion

FİXA POLYFORM K is an economical, safe, and versatile concentrated formwork release agent that improves concrete surface quality in wooden, plywood, and plastic formwork applications while providing excellent performance and cost efficiency.