FİXA® TILE & CERAMIC ADHESIVE (C1T)
Product Description
FİXA TILE & CERAMIC ADHESIVE (C1T) is a cement-based, single-component, reduced-slip tile adhesive designed for economical and reliable ceramic tile installations.
It provides secure bonding for small and medium-sized ceramic tiles in interior applications and delivers long-lasting performance for residential and commercial projects. Classified as C1T according to EN 12004, it offers dependable adhesion with reduced tile slip during installation.
Key Features
- Cement-based, single-component formulation
- Reduced-slip performance for vertical applications
- C1T classification in accordance with EN 12004
- Cost-effective and reliable solution
- Ideal for small and medium-sized ceramic tiles (up to 33 × 33 cm)
- Suitable for interior applications
- Smooth, homogeneous consistency for easy installation
Technical Specifications
| Property | Value |
|---|
| Chemical Composition | Cement-based |
| Color | Gray |
| Components | Single-component |
| Water Mixing Ratio | 6.0–6.5 L water per 25 kg bag |
| Fresh Mortar Density | Approx. 1.60 ± 0.05 kg/L |
| Open Time | ≥ 20 minutes |
| Adjustment Time | Approx. 10 minutes |
| Slip (EN 1308) | ≤ 0.5 mm |
| Bond Strength (EN 1348) | ≥ 0.5 N/mm² |
| Classification | C1T – Reduced Slip, Standard Adhesive |
| Application Temperature | +5°C to +30°C |
| Consumption | 3–5 kg/m² (depending on tile size) |
| Shelf Life | 12 months (stored in original unopened packaging in a dry place) |
Applications
FİXA TILE & CERAMIC ADHESIVE (C1T) is recommended for:
- Interior wall and floor installations
- Horizontal and vertical surfaces
- Small and medium-sized ceramic tiles (maximum 33 × 33 cm)
- Ceramic tiles with water absorption greater than 3%
- Bathrooms, kitchens, corridors, and other residential spaces
Advantages
- Cost-Effective Solution: Excellent price-to-performance ratio for everyday ceramic installations.
- Reliable Bond Strength: Provides secure adhesion between ceramic tiles and substrates.
- Reduced Slip: Prevents tiles from sliding during vertical installations.
- Easy Application: Smooth consistency improves workability and installation speed.
- Professional Quality: Complies with EN 12004 C1T performance requirements.
Surface Preparation
- Ensure the substrate is clean, dry, sound, and free from dust, grease, paint, or any contaminants.
- Lightly dampen the substrate if necessary.
- A suitable primer is recommended for highly absorbent surfaces.
Mixing Instructions
- Mix one 25 kg bag with 6.0–6.5 liters of clean water.
- Blend using a low-speed mixer for 3–5 minutes until smooth.
- Allow the mixture to rest for 2–3 minutes, then remix briefly before application.
- Pot life: Approximately 20 minutes.
Application Instructions
- Apply the adhesive evenly using a notched steel trowel.
- Install ceramic tiles within 20 minutes, before surface skin formation occurs.
- Ensure full adhesive coverage on the back of each tile.
Grouting
- Floor installations: Grout after approximately 24 hours.
- Wall installations: Grout after approximately 48 hours.
Application Recommendations
- Do not apply below +5°C.
- Avoid application under direct sunlight, strong winds, or freezing conditions.
- Do not add any additives other than clean water.
- Protect newly installed surfaces from water and impact for at least 24 hours.
Frequently Asked Questions (FAQ)
Where can this adhesive be used?
It is designed for interior wall and floor ceramic tile installations.
What is the maximum recommended tile size?
It is recommended for ceramic tiles up to 33 × 33 cm.
What is the product classification?
FİXA TILE & CERAMIC ADHESIVE is classified as C1T, offering reduced slip in accordance with EN 12004.
Can it be used outdoors?
No. This product is designed exclusively for interior applications.
When can grouting begin?
Grouting may begin after approximately 24 hours on floors and 48 hours on walls.
Reliable & Economical Tile Installation
FİXA TILE & CERAMIC ADHESIVE (C1T) is an ideal choice for professionals and contractors seeking an economical, dependable, and easy-to-apply adhesive for interior ceramic tile installations while maintaining consistent quality and long-term durability.