22/07/2026
KYK Ceramic Adhesive is a cement-based, polymer-modified, single-component adhesive mortar. It provides strong adhesion by creating a powerful chemical bond between the applied surface and ceramic tiles, tiles, granite, marble, or porcelain materials. Thanks to its formulation complying with the TS EN 12004 C1–C2 standard, it can be safely used for both interior and exterior applications.
The surface must be clean, dry, solid, and free from dust, oil, and loose particles before application.
25 kg of KYK Ceramic Adhesive should be mixed with 6–7.5 liters of clean water using a low-speed mixer until a homogeneous, lump-free consistency is achieved.
The mortar is applied onto the surface using a notched trowel, and ceramic tiles are pressed firmly into place.
Grouting can be performed approximately 24 hours after application.
For exterior applications and large-sized tiles, the buttering-floating method (applying adhesive both on the substrate and the back of the tile) is recommended.
Actual consumption may vary depending on surface roughness and tile dimensions.
Packaging: 25 kg kraft bag
Shelf Life: 12 months
Storage Conditions: Store in a dry and cool environment with humidity below 60%, protected from direct sunlight.
It is used for ceramic applications on interior and exterior walls and floors.
Yes. Thanks to its high water resistance, it can be safely used in wet areas.
It can be applied to concrete, plaster, screed, aerated concrete, and ceramic-covered surfaces.
Grouting can be performed approximately 24 hours after installation.
Yes. C2TE-class adhesives with high flexibility are suitable for large-format ceramic tiles.
KYK Ceramic Adhesive provides a professional solution with high adhesion strength, water resistance, and flexibility. It delivers reliable performance for ceramic, porcelain, and natural stone applications in both interior and exterior environments.
