KYK Megaİzo Lastik 6 S203 | UV Resistant Super Elastic Waterproofing Material

Elastomeric Polymer-Based, UV Resistant, Single-Component Super Elastic Waterproofing Coating

KYK Megaİzo Lastik 6 S203 is a high-performance, single-component waterproofing coating based on elastomeric polymers with excellent UV resistance. Thanks to its ready-to-use formulation, it can be directly applied both as an under-coating waterproofing layer and as an exposed final coat.

With its superior elasticity, crack bridging capability even at low temperatures and solvent-free environmentally friendly structure, it provides long-lasting and reliable waterproofing solutions.

Application Areas

Megaİzo Lastik 6 S203 can be applied on all horizontal and vertical surfaces in both indoor and outdoor environments.

Main application areas:

• Open terrace roofs and balconies (can be used as a final exposed coat)
• Building exterior facades
• Concrete, plaster and metal surfaces
• Areas exposed to intense UV radiation

Product Advantages

• UV resistant; does not deteriorate under sunlight exposure
• Crack bridging performance down to -20°C
• Super elastic structure with more than 600% elongation capacity
• Breathable surface thanks to water vapor permeability
• High adhesion strength and seamless coating performance
• Self-priming formulation
• Ready to use, no mixing required
• Solvent-free structure

Application Surfaces

Wall Applications

Cement-based plaster surfaces

• Self-priming application or MegaFilm A901, A501, A502 primers

Concrete surfaces

• Self-priming application, MegaFilm A901, A501 or BB A204 primers

Metal surfaces

• MegaFilm A502 primer

Floor Applications

Screed surfaces

• Self-priming application, MegaFilm A901 or A501 primers

Concrete surfaces

• Self-priming application, MegaFilm A901, A501 or BB A204 primers

Metal surfaces

• MegaFilm A502 primer

Surface Preparation

• The surface must be dry, clean, sound and free from dust.
• Surface defects larger than 1 cm should be repaired with MegaTamir T101/T102; structural repairs should be carried out with T103/T104.
• Corner joints should be rounded or reinforced with Megaİzo Tape S901.
• Gaps around drainage points should be filled with MegaTamir Grout T105/T107.
• Expansion joints should be properly formed on large surfaces, and Megaİzo PU Mastic HM S492 should be used for movement joints.
• If surface moisture exceeds 20%, MegaFilm İzo Epo A501 primer should be applied.
• On absorbent cement-based surfaces, the product can be diluted with 20% water and used as a primer coat.
• MegaFilm A502 should be used on metal surfaces, while BB A204 primer is recommended for exposed concrete surfaces.

Application Method

• The product is ready to use. Before application, it should be mixed with a low-speed mixer until a homogeneous consistency is achieved.
• Apply a minimum of 2 coats. Under low-temperature or high-humidity conditions, 3 coats are recommended.
• Each coat should be applied perpendicular to the previous coat.
• Target dry film thickness: 2 mm
• Application temperature: +5°C to +35°C
• Application equipment: Roller or airless spray machine

Technical Specifications

Packaging and Storage

Packaging options:

White color:

• 5 kg plastic bucket
• 20 kg plastic bucket

Grey color:

• 20 kg plastic bucket

Shelf Life:
12 months

Storage Conditions:

• Store between +5°C and +25°C.
• Keep in environments with relative humidity below 60%.
• Protect from direct sunlight.
• Keep the container tightly closed when not in use.

Conclusion

KYK Megaİzo Lastik 6 S203 provides professional waterproofing solutions for terraces, balconies and exterior facades thanks to its high UV resistance, low-temperature flexibility and superior elastic performance.

It can be safely preferred for both under-coating waterproofing systems and exposed final coat applications.

Frequently Asked Questions (FAQ)

1) Where can KYK Megaİzo Lastik 6 S203 be used?

It can be applied on terrace roofs, balconies, exterior facades and UV-exposed surfaces as an under-coating or exposed final waterproofing layer.

2) Is it a single-component product?

Yes. It is a single-component and ready-to-use waterproofing material.

3) How does it perform at low temperatures?

It maintains its crack bridging capability down to -20°C.

4) Is a primer required?

The product has self-priming properties. However, depending on the surface condition, MegaFilm A901, BB A204, A502 or İzo Epo A501 primers can be used.

5) How many coats should be applied?

At least 2 coats should be applied. Under challenging environmental conditions, 3 coats are recommended.

6) What color options are available?

It is available in white and grey color options.

7) When can the surface be put into service?

A minimum waiting period of 7 days is recommended to achieve full performance.

8) Is it resistant to negative water pressure?

No. It should only be used against positive water pressure.