KYK Megaİzo Lastik 5 S202 | Single-Component Elastic Waterproofing Material

Product Description

KYK Megaİzo Lastik 5 S202 is a single-component, ready-to-use waterproofing material based on elastomeric polymers. Thanks to its flexible structure, it adapts to surface movements and cracks while creating a seamless waterproofing layer.

It offers a wide range of applications, from wet areas to terraces and sloped roofs. It can be safely applied on horizontal and vertical surfaces in both indoor and outdoor environments. It is generally preferred as a waterproofing layer before final coating applications.

Application Areas

• Wet areas such as bathrooms, kitchens and balconies
• Terraces and sloped roofs (under-coating application)
• Screed and concrete surfaces (with suitable primer)

Recommended Primers:

• For cement-based screeds: MegaFilm A901 or MegaFilm İzo Epo A501
• For concrete surfaces: MegaFilm A901, MegaFilm İzo Epo A501 or MegaFilm BB A204

Key Features and Advantages

• Crack bridging performance ≥ 0.75 mm
• Elongation at break above 100%
• Creates a seamless and continuous waterproofing layer
• High adhesion strength
• Easy application thanks to its ready-to-use formulation
• Solvent-free and environmentally friendly

Application Method

• The product is ready to use. Before application, it can be mixed with a low-speed mixer until a homogeneous consistency is achieved.
• Apply at least 2 coats. Each coat should be applied perpendicular to the previous coat.
• Application temperature: between +5°C and +35°C.
• Under low-temperature conditions (+5°C to +15°C) or high relative humidity conditions (above 60%), at least 3 coats should be applied to achieve the required dry film thickness.
• For ceramic applications, C2, S1 or S2 class tile adhesives should be preferred.

Application Limits

Technical Specifications

Packaging and Storage

Packaging options:

• 5 kg plastic bucket
• 20 kg plastic bucket

Shelf Life:
12 months (in unopened packaging)

Storage Conditions:

• Store between +5°C and +25°C.
• Keep in environments with relative humidity below 60%.
• Protect from direct sunlight.
• Keep the container tightly closed between uses.

Application Recommendations

• Do not add water or any foreign material into the product.
• Do not use against negative water pressure.
• Horizontal surfaces should have a slope towards drainage points.
• The surface should be protected from water contact during and after application until the recommended curing period is completed.
• Do not apply during rainy weather, excessive wind or conditions with frost risk.

Frequently Asked Questions (FAQ)

1) Where can KYK Megaİzo Lastik 5 S202 be used?

It is used for waterproofing under coatings in wet areas, terraces and sloped roofs, as well as on indoor and outdoor horizontal and vertical surfaces.

2) Does it require mixing?

No. It is a single-component, ready-to-use product. Only homogeneous mixing before application is sufficient.

3) How many coats should be applied?

Under normal conditions, a minimum of 2 coats is recommended. Under low-temperature or high-humidity conditions, at least 3 coats should be applied.

4) What are the waiting times?

A minimum of 6 hours should be waited between coats, 3 days before covering, and 7 days before full service use.

5) What are the performance values?

The product provides a crack bridging capacity of ≥0.75 mm and elongation at break above 100%.

6) Which primers are compatible with the product?

It can be used with MegaFilm A901, MegaFilm İzo Epo A501 or MegaFilm BB A204 primers.

7) Is it suitable for negative water pressure?

No. It should only be used against positive water pressure.

8) What is the approximate consumption rate?

For a 1.0 mm film thickness, the approximate consumption is between 1.2 – 2.0 kg/m², depending on surface conditions.