20/07/2026
KYK Megaİzo Lastik 7 S102 is a semi-flexible waterproofing material consisting of a cement-based powder component and a polymer emulsion-based liquid component. It is applied before coating applications and creates a continuous waterproofing layer on both interior and exterior surfaces, including horizontal and vertical areas.
With its high adhesion strength, solvent-free formulation, and environmentally friendly structure, it provides a safe and durable waterproofing solution.
Provides crack-bridging performance under standard conditions.
Creates a continuous and integrated waterproofing barrier without joints.
Offers strong adhesion performance for long-lasting applications.
Allows practical and fast repair when required.
Provides a safer application solution with reduced environmental impact.
Its practical mixing and application process saves time during installation.
Note: It is not suitable for applications exposed to negative water pressure.
Slowly add 20 kg powder component into 6.35 kg liquid component.
Mix with a low-speed mixer (approximately 400 rpm) until a homogeneous, lump-free consistency is achieved.
After allowing the mixture to rest for 3–4 minutes, remix for 1–2 minutes before application.
Megaİzo File S902 can be used between coats.
The reinforcement mesh should be placed while the first coat is still fresh. After curing, the second coat can be applied.
For floor applications, ceramic adhesives complying with TS EN 12004 C2 and S1/S2 classifications should be preferred.
Application surface and ambient temperature: +5°C to +35°C
During and after application, the surface must be protected from water contact until the specified curing periods are completed.
Recommended consumption for 2 mm dry film thickness:3.2–4.0 kg/m²
Actual consumption may vary depending on surface absorption, roughness, and environmental conditions.
Shelf Life: 12 months (in unopened packaging, stored between +5°C and +25°C in a dry and cool environment)
Keep away from direct sunlight and close packaging tightly after use.
KYK Megaİzo Lastik 7 S102 provides a semi-flexible, seamless, and reliable waterproofing solution before coating applications in wet areas such as bathrooms, kitchens, balconies, and terraces.
With its crack-bridging capability, high adhesion strength, and CE-certified performance, it creates a durable and standards-compliant waterproofing system for professional construction projects.
It is suitable for waterproofing applications before coating in bathrooms, kitchens, balconies, and terraces, on both interior and exterior horizontal and vertical surfaces.
At least two coats should be applied perpendicular to each other, achieving a total dry film thickness of approximately 2 mm.
Ceramic or coating applications can be started after a minimum of 3 days. The system should be opened to use after at least 7 days.
Ceramic adhesives complying with TS EN 12004 C2 and S1/S2 classifications are recommended.
No. It is not suitable for applications exposed to negative water pressure.
