Webermin P 2.0
Webermin P 2.0 is a cement-based, polymer-modified decorative exterior facade coating designed to provide both aesthetic appeal and long-lasting durability. Its 2 mm textured finish creates a natural and attractive surface appearance, while its high vapor permeability allows walls to breathe. Compatible with exterior thermal insulation systems, it is suitable for both new construction and renovation projects.
Advantages of Webermin P 2.0
High Vapor Permeability: Helps maintain moisture balance within wall structures.
Durable Structure: The reinforced formula provides long-term resistance against environmental conditions.
Water and Frost Resistance: Ensures reliable performance in exterior applications.
Decorative Appearance: Creates an attractive facade with a 2 mm textured finish.
Easy Application: Offers excellent workability with a smooth and homogeneous consistency.
Areas of Use
- Exterior facades of all types of buildings
- Exterior thermal insulation systems (EIFS/ETICS)
- Decorative finishing coat applications
- New construction and renovation projects
Suitable Substrates
- Cement-based plasters
- Properly prepared exterior facade surfaces
Not Suitable For
- Horizontal surfaces or surfaces with a slope below 45°
- Direct application on brick or aerated concrete
- Weak or deteriorated plaster surfaces
Application Conditions
- Ambient temperature: +5°C to +30°C
- Mixing time: 5 minutes
- Resting time: 5 minutes
- Pot life: 3–4 hours
- Application thickness: 2 mm
- Application tools: Steel trowel and plastic trowel
All specified values are based on an ambient and substrate temperature of 20°C.
Application Steps
- Mix the product with clean water according to the recommended ratio.
- Blend thoroughly using a low-speed mixer for approximately 5 minutes.
- Allow the mixture to rest for 5 minutes, then remix briefly.
- Apply evenly to the substrate with a steel trowel at approximately 2 mm thickness.
- Create the desired texture using a plastic trowel.
- Surface texturing should be completed while the material is still wet.
Frequently Asked Questions (FAQ)
On which surfaces should Webermin P 2.0 not be applied?
It should not be applied on horizontal surfaces, surfaces with a slope below 45°, directly on brick or aerated concrete, or on weak plaster substrates.
What is the pot life of the product?
The prepared mortar remains usable for approximately 3–4 hours.
What is the recommended application thickness?
According to the technical specifications, the product should be applied at a thickness of 2 mm.
Which tools are required for application?
Application is carried out using a steel trowel and a plastic trowel.
Can it be used in exterior thermal insulation systems?
Yes. Webermin P 2.0 is suitable as a decorative finishing coat in exterior thermal insulation systems.