WEBER ANCHOR EA

WEBER ANCHOR EA is a professional anchoring and mounting material based on epoxy acrylate technology, featuring a two-component formulation and extremely fast setting properties. Thanks to its thixotropic structure, it does not sag and provides excellent application control. With high mechanical strength, rapid curing, and compatibility with a wide range of substrates, it offers a reliable solution for both structural strengthening and industrial applications.

The product is specifically developed for critical applications such as rebar anchoring, bolt and dowel fixing, crack injection, and reinforcement of structural elements subjected to heavy loads.

What is WEBER ANCHOR EA?

WEBER ANCHOR EA is characterized by:

• Epoxy acrylate-based formulation
• Two-component system
• Extremely fast setting properties
• Thixotropic consistency (non-sagging)
• Corrosion resistance
• Chemical resistance
• Suitability for industrial applications

These features make it an ideal solution for high-performance anchoring and installation works where maximum reliability is required.

Areas of Use

Its versatile application range makes it suitable for both new construction projects and strengthening works:

• Rebar (starter bar) anchoring in concrete
• Reinforced concrete strengthening applications
• Connections between existing concrete and new structural elements
• Medium and heavy-duty installation works
• Fixing injection packers
• Crack sealing and injection applications
• Bolt and dowel anchoring
• Bonding concrete, stone, and precast elements

Product Advantages

• Achieves high mechanical strength in a short time
• Protects reinforcement bars against corrosion
• Can be applied on damp surfaces
• Provides long-lasting performance under industrial conditions
• Delivers strong adhesion on various substrates
• Offers excellent chemical resistance

Technical Specifications

• Packaging: 300 ml
• Application Equipment: Chemical anchor gun
• Application Temperature: +5°C to +30°C
• Density: 1.70 ± 0.03 kg/L

Mixing Ratio (by Volume)

• Component A: 87%
• Component B: 13%

Full Cure Time

• 7 days at 20°C

Performance According to Temperature

These values clearly demonstrate the product’s fast-setting characteristics.

Application Warnings

• The first light-colored material dispensed from the cartridge should not be used, as the components are not yet fully mixed.
• For best results, perform a substrate test before application.
• Avoid application under direct sunlight.
• Protective gloves and safety goggles should be worn during application.
• In case of contact with skin or eyes, rinse thoroughly with plenty of water and seek medical attention if necessary.
• Ensure adequate ventilation in the application area.

Frequently Asked Questions

What applications is WEBER ANCHOR EA suitable for?

It is suitable for rebar anchoring, bolt and dowel installation, crack sealing, injection applications, and structural strengthening works.

Can it be applied on damp surfaces?

Yes. The product performs effectively even on damp substrates.

What is the curing time?

At an ambient temperature of 20°C, full curing is achieved in approximately 7 days.

Why should the first material dispensed from the cartridge not be used?

The initial material indicates that the two components have not yet mixed properly. Therefore, it should be discarded before application.