WEBERREP EP GROUT
WEBERREP EP GROUT is a three-component, epoxy-based, self-leveling grout mortar designed to deliver exceptional mechanical strength in demanding applications. Engineered for areas exposed to heavy loads and intensive traffic, it provides outstanding performance in structural grouting and bonding applications.
Suitable for bridges, airport runways, port facilities, industrial floors, machine foundations, and rail installations, WEBERREP EP GROUT is a professional solution for projects requiring superior durability and long-term reliability.
What is WEBERREP EP GROUT?
WEBERREP EP GROUT is a:
- Epoxy-based grout mortar
- Three-component system (Component A + B + C)
- Self-leveling, high-flow formulation
- High-adhesion material
- High compressive and flexural strength grout
- Excellent bonding to metal and mineral substrates
- Resistant to vibration and structural movement
These properties make it an ideal solution for demanding industrial and infrastructure applications.
Applications
Its versatile formulation makes WEBERREP EP GROUT suitable for a wide range of heavy-duty applications.
Grouting Applications
- Bridges
- Airport runways
- Port facilities
- Industrial and factory floors
- Areas exposed to heavy vehicle traffic
- Bearing plate installation and repair
- Machine foundations
- Crane foundation systems
- Rail installation
Structural Bonding Applications
- Fixing connection elements
- Vertical rebar anchoring applications
The product provides exceptional performance on both horizontal and vertical surfaces.
Product Advantages
- Convenient pre-packaged component set
- Self-leveling, highly fluid consistency
- Non-shrink formulation
- Excellent adhesion to metal surfaces
- High mechanical strength
- Resistant to vibration and dynamic loads
- Long-lasting performance under heavy service conditions
Application Details
Application Tool: Mechanical mixer
Application Temperature: +5°C to +30°C
Pot Life: Approximately 45 minutes
Maximum Application Thickness (Single Layer): 40 mm
Waiting Time Between Layers: Approximately 2 hours
Ready for Service: Approximately 2 hours
Full Cure: 7 days
Fresh Mortar Density: 2 g/cm³ (A+B+C mixture)
Mixing Information
WEBERREP EP GROUT is supplied as a complete three-component system:
- Component A: 2 kg
- Component B: 1 kg
- Component C: 12.5 kg
Total Kit Weight: 15.5 kg
All components must be mixed according to the specified proportions. Do not add solvents, aggregates, fillers, or any other foreign materials to the mixture.
Application Recommendations
- Mix all components in the specified ratio.
- Do not add solvents or other additives.
- Do not use additional aggregates or fillers.
- At temperatures below 10°C, the material's flowability may decrease.
- Under cold conditions, store the product at approximately 23°C for 12 hours before application.
Following the recommended mixing procedures and temperature conditions is essential to achieve optimum performance from the epoxy system.
Frequently Asked Questions (FAQ)
Where can WEBERREP EP GROUT be used?
It is suitable for bridges, airport runways, port facilities, industrial floors, machine foundations, rail installations, and anchoring applications.
What is the pot life of the mixed product?
The prepared mixture should be applied within approximately 45 minutes.
When can the repaired area be put into service?
The surface can generally be put into service approximately 2 hours after application.
Is WEBERREP EP GROUT non-shrink?
Yes. Its epoxy-based formulation provides a non-shrink grout that maintains dimensional stability after curing.
What is the maximum application thickness?
The recommended maximum thickness for a single application is 40 mm (4 cm).